Model: PT300DW
IMPORTANT NOTICE: On ALL Intercomp Product orders, there is a 2 Week lead time before shipping. Please allow sufficent time for your order to process.
The PT300 Series of scales are designed to maximize legal payloads with concern for violations and reduction of maintenance due to overload stress on equipment. The PT300DW weighs only 49lb/22kg and is capable of weighing loads up to 40,000lb/18000kg. The display area can be lighted for night use by merely touching the "LAMP" switch. It is possible to sequentially couple any number of PT300 scales in series, for the purpose of obtaining the total weight of a vehicle. By activating the "TOTAL" switch, the total weight of all the preceding scales will be displayed. The scales are linked at the I/O terminal jack with an optional cable. The I/O terminal will also transmit required data to a printer or a display, such as Intercomp's S400HI ultra bright digital display. Also available are optional carrying cases that exceed government specifications.
20 mA current loop data interface Operates on six 1.2 Volt NiCad (standard) or alkaline batteries Battery life: Approximately 1500 charge/discharge cycles Battery duration between charges: Approximately 8 hours of continuous use before the scale shuts itself off. (These numbers are lowered by the use of the lamps or active current loop transmission.) Charging voltage: 11.5 Volts - 14.5 Volts DC. Protection is provided for accidental reversal of the charging connections Charging current starts at 300mA and drops down to 50mA after eight hours Charging time: Eight hours if the batteries are discharged to the point of turning off the scale	NTEP Approved / Legal for Trade

Specifications
Capacity:	5,000lb / 2,000kg
Resolution	5lb / 2kg
Accuracy	±1% of reading static mode (NTEP Class III)
Units	lb, kg
Platform Size	22 x 14"
Overall Size	3 x 26 x 20"
Output	Axle Totalizing: Transmits weight to another scale for totalizing individual axles, tandem axles or wheel groups Printers: 20mA passive current loop to interface with a remote printer or display
Power	Self-contained nickel cadmium batteries (standard) or alkalines. Intergral recharger to charge or operate from a 12, 110 or 220 volt power source.

Product Datasheet (.pdf)